Table of Contents
Advertisement
[NAME EDIT]
Edits the name of the scene file selected in the scene file menu. (Maximum 8 characters)
≥ Refer to page 100 for setting procedures.
[LOAD/SAVE/INITIALIZE]
Loads/saves/initializes the setting values of the scene file assigned to the current scene file number (any one from 1 to 6).
[LOAD]
[SAVE]
[INITIALIZE]
≥ Refer to pages 99 to 100 for setting procedures.
[MASTER DTL]
Sets the level of the detail effect of the whole part.
The items that can be set are as follows.
≥ [j15]...[i15]
[DTL CORING]
Sets the level of signal (including noise) that does not activate the detail effect.
The items that can be set are as follows.
≥ [0]...[30]
[V.DTL LEVEL]
Sets the intensity of the detail level in the vertical direction.
The items that can be set are as follows.
≥ [j7]...[i7]
[RB GAIN CONTROL SETTING]
Adjust the color hue when white balance has been set in [Ach] or [Bch].
You can also decide whether to maintain the setting content when you have made white balance adjustments/black balance adjustments.
[R GAIN AWB A]
Set the Rch gain (strength of red) for white balance [Ach].
The items that can be set are as follows.
≥ [j30]...[i30]
[B GAIN AWB A]
Set the Bch gain (strength of blue) for white balance [Ach].
The items that can be set are as follows.
≥ [j30]...[i30]
[R GAIN AWB B]
Set the Rch gain (strength of red) for white balance [Bch].
The items that can be set are as follows.
≥ [j30]...[i30]
[B GAIN AWB B]
Set the Bch gain (strength of blue) for white balance [Bch].
The items that can be set are as follows.
≥ [j30]...[i30]
[AWB A GAIN OFFSET]
When the white balance has been automatically performed with [Ach], set the value of Rch gain and Bch gain.
[ON]
[OFF]
[AWB B GAIN OFFSET]
When the white balance has been automatically performed with [Bch], set the value of Rch gain and Bch gain.
[ON]
[OFF]
Chapter 4 Operation — Menu settings
Selects and loads the scene file saved in the internal memory of the unit.
Saves the current setting value as a scene file in the internal memory of the unit by specifying the title and the file number.
Initializes the selected scene files (1 to 6) to the factory settings.
Keeps the values set in [R GAIN AWB A] and [B GAIN AWB A].
Sets the value of Rch gain and Bch gain to [0].
Keeps the values set in [R GAIN AWB B] and [B GAIN AWB B].
Sets the value of Rch gain and Bch gain to [0].
- 65 -
Advertisement
Table of Contents
