Panasonic AG-CX6 Operating Instructions Manual page 85

[CLEAR ACTIVATION]
Clears the activation license information that is saved.
The items that can be selected are as follows.
≥ [YES], [NO]
[WLAN PROPERTY]
Performs settings related to the wireless LAN.
[TYPE]
Sets the connection method to the wireless LAN.
[DIRECT]
[INFRA(SELECT)]
[INFRA(MANUAL)]
(Factory setting: [DIRECT])
[SSID]
Enters or displays the network name of this unit or the wireless access point (SSID).
Select the following items to set this unit's SSID.
≥ The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]
Enter the SSID for this unit using 32 characters or less.
≥ Factory default value for this unit's SSID:
The model number of the unit you are using is set. (For example: [AG-CX10], etc.)
[CHANNEL]
Sets the channel to be used when connected to the wireless LAN with following items set.
≥ The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]
The items that can be set are as follows.
≥ [AUTO], [CH1], [CH6], [CH11]
(Factory setting: [AUTO])
[ENCRYPTION]
Sets the encryption method when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.
The items that can be set are as follows.
≥ [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
(Factory setting: [WPA2-AES])
@
NOTE
0 The setting is fixed to [WPA2-AES] when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] is set.
[ENCRYPT KEY]
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.
(Factory setting: [01234567890123456789abcdef])
[WLAN IPv4 SETTING]
[DHCP]
Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the unit.
[OFF]
[CLIENT]
[SERVER]
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [192.168.0.1])
@
NOTE
0 Cannot be set when [WLAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
[SUBNET MASK]
Sets the subnet mask.
(Factory setting: [255.255.255.0])
@ NOTE
0 Cannot be set when [WLAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
Chapter 4 Operation — Menu settings
It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet terminal.
Connects to the wireless access point. The access point is selected from the list.
Connects to the wireless access point. Wireless access point is entered manually.
Does not use DHCP.
Performs automatic acquisition through DHCP if connecting by setting [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/
[INFRA(MANUAL)].
Enables the DHCP server function of the unit when connecting by setting [WLAN PROPERTY] → [TYPE] → [DIRECT].
- 85 -