1. Cap
2. Bolt
3. Trim tab
Bolt tightening torque:
42 Nm (4.28 kgf-m, 31.0 ft-lb)
EMU26342
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
1
2
3
ZMU08466
A
B
ZMU08467
ECM00661
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to secure
it in the tilt position.
EMU40762
Cowling lock lever
The cowling lock levers are used to secure
the top cowling.
Components
ZMU05352
33