Setting Up The Oscillators (Osc1/2); Selecting A Wave - Roland V-Synth Quick Start Manual

Creating a Patch

Setting Up the Oscillators (OSC1/2)

The oscillator sections produce the original sound, either by playing back an internal
PCM wave or a sampled wave, or by generating an analog modeling wave.

Selecting a Wave

1
Make sure that the PATCH PLAY screen is displayed.
2
In the lower part of the screen, touch <OSC1> (or <OSC2>).
A screen like the following appears. If a different screen appears, touch the <OSC
Type> tab at the left side of the screen.
Analog oscillator
fig.Q-28_60
PCM oscillator
fig.Q-29_60
3
Touch either <ANALOG> or <PCM> to select the type of oscillator.
4
In the Waveform area, select the wave you wish to use.
Make your selection while playing the keyboard to hear the sounds.
22