Table of Contents
Advertisement
DVD SETUP
• When your TV's video format does not match the
setting for the TV TYPE, the image of on-screen
display will be distorted or will not be displayed at
all. To bring back the on-screen display, select the
corresponding system using DIMMER NTSC/PAL
button on the front panel. Refer to TV TYPE on page
17.
• For the NTSC TV customers:
When the unit is turned on for the first time (Default is
MULTI), the opening screen is output in PAL system.
Though the image will be distorted consequently, this is
not a malfunction.
(The video format will be converted in NTSC system
after playing back an NTSC disc once.)
VIDEO OUT (Default: SCART)
• Press the Cursor buttons
(K or L) to select a setting
(SCART, COMPONENT
INTERLACE or COMPONENT
PROGRESSIVE), then press the
ENTER button.
• This setting will be effective when you exit the setup
screen by pressing the SETUP button.
• When VIDEO OUT is COMPONENT PROGRESSIVE,
P.SCAN appears on the DVD player's front panel
display after you exited the setup screen.
• In the HDMI output mode, even when VIDEO OUT
is set to COMPONENT PROGRESSIVE, signals are
output always as Interlace.
• Refer to page 12 for more details.
PROG.MODE (Default: AUTO1)
• Press the Cursor buttons
(K or L) to select a mode for the
progressive scan output, then
press the ENTER button.
• AUTO1: mode suitable for images
on the film material.
• AUTO2: mode for images on the material of 30-frame
film.
• VIDEO1: mode for normal video material.
• VIDEO2: mode for video material with less movements.
• VIDEO3: mode for video material with many
movements.
HDMI SELECT (Default: YCbCr)
• Select an HDMI output mode
between YCbCr and RGB.
• When the connected equipment
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
HDMI PICTURE (Default: NORMAL)
• Select an HDMI picture
mode between NORMAL and
ENHANCED.
• Select ENHANCED if the black-
white contrast is not clear.
• This setting is effective only for
HDMI RGB output.
5 Press the SETUP button to exit and activate the
new settings.
NOTES:
• Be sure to press the SETUP button, or the setting will
not work.
• When changing the VIDEO OUT setting (SCART,
COMPONENT INTERLACE or COMPONENT
PROGRESSIVE), connect to a Video jack or an
S-Video jack on the TV. If the setting is changed, for
example, to SCART while the Component Video jacks
are used to connect to the TV, a distorted video signal
may be output.
Audio Setting
You can change some Audio settings. It only affects during
the playback of DVD discs.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select
CUSTOM, then press the ENTER button.
• The CUSTOM mode will appear.
3 Press the Cursor buttons (s or B) to select
AUDIO, then press the ENTER button to confirm.
4 Press the Cursor buttons (K or L) to select an
item, then press the ENTER button.
• This menu display contains 2 pages. Press the Cursor
button (L) repeatedly to show the next page.
DISPLAY
VIDEO OUT
SCART
COMPONENT INTERLACE
COMPONENT PROGRESSIVE
DRC (Dynamic Range Control)
(Default: ON)
• DRC function compresses the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
LPCM SELECT (Default: OFF)
• Set to ON when outputting in
48kHz.
DISPLAY
• This function is available only
PROG. MODE
on digital outputting of a disc
AUTO1
AUTO2
VIDEO1
recorded in 96kHz.
VIDEO2
VIDEO3
• Sounds of the DVD-Audio which
exceed 96kHz will be output as 96kHz even if LPCM
SELECT is set to OFF.
• This function is not effective for the HDMI sound
output.
When playing disc with copyright protection
• The sound will be down sampled at 48kHz, even if you
set to OFF.
DOLBY DIGITAL (Default: BITSTREAM) QUICK
• Set to BITSTREAM when the
DISPLAY
player is connected to a Dolby
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
Digital decoder.
TV TYPE
MULTI
VIDEO OUT
SCART
• This function is effective only
PROG. MODE
AUTO1
HDMI SELECT
YCbCr
HDMI PICTURE
NORMAL
for the COAXIAL, OPTICAL and
HDMI connections.
BITSTREAM: Output by Dolby
DISPLAY
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
TV TYPE
MULTI
VIDEO OUT
SCART
PROG. MODE
AUTO1
PCM: Convert Dolby Digital to PCM.
HDMI SELECT
YCbCr
HDMI PICTURE
NORMAL
DTS (Default: BITSTREAM) QUICK
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
BITSTREAM: Output by DTS
PCM: Convert DTS to PCM.
– 30 –
AUDIO
DRC
ON
LPCM SELECT
OFF
DOLBY DIGITAL
BITSTREAM
DTS
BITSTREAM
MPEG
PCM
BASS ENHANCER
OFF
AUDIO MODE
HDMI
Digital.
• For HDMI connection, if the connected
equipment is not compatible with the Dolby
Digital BITSTREAM, the signals are output as
PCM regardless of the setting.
sound.
• For HDMI connection, if
the connected equipment
is not compatible with the
DTS BITSTREAM, the signals are output as
PCM regardless of the setting.
AUDIO
HDMI AUDIO
2 CHANNEL
ANALOG AUDIO
2 CHANNEL
AUDIO
DRC
ON
LPCM SELECT
OFF
DOLBY DIGITAL
BITSTREAM
DTS
BITSTREAM
MPEG
PCM
BASS ENHANCER
OFF
AUDIO MODE
HDMI
AUDIO
DRC
ON
LPCM SELECT
OFF
DOLBY DIGITAL
BITSTREAM
DTS
BITSTREAM
MPEG
PCM
BASS ENHANCER
OFF
AUDIO MODE
HDMI
AUDIO
DRC
ON
LPCM SELECT
OFF
DOLBY DIGITAL
BITSTREAM
DTS
BITSTREAM
MPEG
PCM
BASS ENHANCER
OFF
AUDIO MODE
HDMI
AUDIO
DRC
ON
LPCM SELECT
OFF
DOLBY DIGITAL
BITSTREAM
DTS
BITSTREAM
MPEG
PCM
BASS ENHANCER
OFF
AUDIO MODE
HDMI
EN
Advertisement
Table of Contents
