Audio Setting; Ratings Control; Rating Level; Ifyou Forget The Password - Denon DVM-1845 Operating Instructions Manual

DVD SETUP . . , ' .
I
a~~'i(.
""" ON
lPCI.l SELECT OFF
DOlBY DlGITA!. 8l1STREAM
DIS 81TSTA£_
AUDIOMOOE HOUI
I
=l.!.I~YJ".
OAC ON
lPCMSElECT OFF
DOlBYOlGlTAI. !I1TsrflEAM
DTS BJT$TFlEAM
AlIDlOlolOOE HOM)
l~l
I
7 [NC·l7J
~IRI
• [PG I3J
3[PGI
-<
Ratings Control
>-
Ratings Control allows you to set a limit, which prevents your
children from viewing inappropriate materials on DVDs. A four-
digit password that you establish will give you the control.
RATING LEVEL
You can set a viewing limit through Rating Level. Playback of
the discs will stop if the disc's general rating exceeds the limit
you set
D
Press the SETUP button in stop mode.
If)
Press the Cursor buttons (..... or
~)
to select
CUSTOM, then press the ENTER button.
~
Press the Cursor buttons (..... or
~----~
.....
~) to select RATINGS, then
I
al.!lra:ir.'
press the ENTER button.
0
D
Press the Numeric buttons to ,.. ~ ~,-
enter your four-digit password.
• When doing this for the first time,
enter any four-digit number by
pressing the Numeric buttons
(except for 4737), then press the
ENTER button. That number will
be used as the password from the
second time onward. Record your
password in case you forget it
~
Press the Cursor buttons (A or '--
~
T) to select RATING LEVEL,
then press the ENTER button.
m
Press the Cursor buttons (A or
T) to select a desired level, then
press the ENTER button.
D
Press the SETUP button to exit
and activate the new settings.
-<
Audio Setting
You can change some Audio settings. It only affects during the
playback of DVD discs.
D
Press the SETUP button in
stop mode.
If)
Press the Cursor buttons (..... or
~) to select
CUSTOM, then press the
ENTER button,
• The custom mode will appear.
~
Press the Cursor buttons (..... or
~)
to select
AUDIO, then the ENTER button to confirm,
D
Press the Cursor buttons (A or T) button to select
an item, then press the ENTER button.
DRC (Dynamic Range Control)
(Default: ON)
• DRC function compresses the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format
LPCM SELECT (Default: OFF)
• Set to ON when outputting in 48kHz.
• This function is available only on
digital outputting of a disc
recorded in 96kHz.
• This function is not effective for
the HDMI sound output
When playing disc with copyright protection
• The sound will be down sampled at 48kHz, even if you
set to OFF.
OAC ON
lPCM SelECT OFf
OOlBY DIGITAl. 81TSTREAM
Drs 8lTSTFU;:Al.l
AUDIO MOOE HDNI
I
=l!.I . '
~a
ORe ON
LPCM SELECT OFF
~:~~~~
AUOIO MOOE HOMI
NOTE:
• This function may not work on some DVDs. Be sure if
the RATINGS operates in the way you have set
To Change the Password:
1) Follow the steps
D
to
D
above,
2) Press the Cursor buttons (. or T) to select PASSWORD
CHANGE, then press the ENTER button.
3) Enter a new four-digit password, then press the ENTER button.
4) Press the SETUP button to exit
I
IFYOU FORGET THE PASSWORD
D
Press 4,7,3,7 at step
D.
• Password will be cleared and rating level will be set to ALL
If)
Repeat steps
D
to
D
to re-establish the parental lock.
I
CONTROL LEVELS
I
• ALL
Parental lock is canceled.
• LevelS
DVO software of any grade (adult/general/children) can
be played back.
• Levels 7 to 2
Only DVD software intended for general use and chil-
dren can be played back.
• Level 1
Only DVD software intended for children can be played
back, with those intended for adult and general use
prohibited.
DOLBY DIGITAL
(Default: BITSTREAM)
lQlJtC~
• Set to BITSTREAM when the
player is connected to a Dolby
Digital decoder.
• This function is effective only for
the COAXIAL, OPTICAL and HDMI
connections.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream.
• For HDMI connection, if the connected equipment
is not compatible with the Dolby Digital
BITSTREAM, the signals are output as PCM
regardless of the setting.
PCM: Convert Dolby Digital to PCM.
DTS
(Default: BITSTREAM)
QUJCK·
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
BITSTREAM:
DTS signals are output as
Bitstream.
• For HDMI connection, if the
connected equipment is not
compatible with the DTS Bitstream, the signals are
not output regardless of the setting,
OFF:
No DTS sound will be output
• DTS sound is bitstream output only, from digital
audio outputs.
AUDIO MODE (Default: HDMI)
• Set to HDMI when outputting the
HDMI sound .
• Set to ANALOG when not
outputting the HOMI sound.
~
Press the SETUP button to exit
and activate the new settings. ' - - - - - - - - - '
-30- EN