Basic Operation; Before Use; Setting The Top Priority Playback Layer For Super Audio Cds; Turning The Power Off - Denon DCD-1510AE Owner's Manual

Basic operation

Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
DISC LAYER
Disc tray
<ON/STANDBY / OFF>
[CD POWER]
DISC LAYER
SOURCE

Before use

Setting the top priority playback layer for
BUTTON
super audio CDs
<BUTTON>
[BUTTON]
• The layer that is played with priority when the disc is loaded can be
set.
• Upon purchase, the priority layer is set to the "STEREO".
1
Turn the power on.
<ON/STANDBY / OFF>
(Press
2
Check that no disc is loaded.
• If the layer is switched while a disc is in the player or the disc tray
is opened,the playback layer switches for that disc, but the top
priority playback layer setting itself does not change.
3
SOURCE
Press
SOURCE
"DISC".
4
DISC LAYER
Press
to set (Super Audio CD only).
[Selectable items]
STEREO : Plays back the 2-channel area of the Super Audio
CD (the default setting).
: Plays back the multi-channel area of the Super
MULTI
Audio CD. The analog output is altered to a down-
mixed 2-channel signal.
CD : Plays back the CD layer of the Super Audio CD.
• When a disc is loaded after the setting has been made, the contents
recorded on the unit layer are displayed.
• If a disc that does not contain the layer set for top priority playback
is loaded, the contents recorded on another layer are displayed
automatically.
• This setting is stored in the memory and is not cleared even when
the disc holder is opened or closed or the power is turned off. To
change the setting, repeat the procedure above.
.)
to set the playback media mode to
and switch to the layer you want
STEREO MULTI
CD
• During playback of the multi-channeled source, the analog output of
the unit plays back a 2-channel downmix.
• If the area and layer have not been set for a disc, the priority playback
order is as follows:
q STEREO w MULTI
• This setting is memorized and is retained even if the disc tray is
opened/closed or the power is switched on/off. Please reconfi gure
the settings if you wish to change them.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.

Turning the power off

1
[CD POWER]
Press .
The power is set to the standby mode.
2
<ON/STANDBY / OFF>
Press .
The power indicator turns off, and so does the power.
Make sure that the disc tray is completely shut before turning off the
power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
<ON/STANDBY / OFF>
time or when going on vacation, either press
turn off the power, or unplug the power cord from the power outlet.
ENGLISH
e CD
to
7