Download Print this page

Ultra Start 2600 Owner's Manual page 2

Advanced remote vehicle starter with security system

Advertisement

Lock Doors
1. Press and release the LOCK button on the remote transmitter.
2. The park lights will flash and the horn (optional) will honk one time.
3. The doors will lock. (With Keyless Entry option)
4. The LED's on the antenna will start flashing within five seconds.
Unlock Doors
1. Press and release the UNLOCK button on the remote transmitter.
2. The park lights will flash and the horn (optional) will honk two times.
3. The doors will unlock. (With Keyless Entry option)
4. The LED's on the antenna will stop flashing.
Optional Driver's Door Unlock Feature
The driver's door unlock feature will unlock the driver's door separately from the other doors.
1. Press and release the UNLOCK button once to unlock driver's door.
2. Press and release a second time within two seconds to unlock all other doors.
Silent Lock And Unlock
1. Press and release the LOCK & UNLOCK buttons at the same time.
2. If locked this will unlock the doors without honks, the park lights will flash two times to confirm the doors unlocked.
3. If unlocked this will lock the doors without honks, the park lights will flash one time to confirm the doors locked.
Trunk Release
1. Press and hold the UNLOCK button for three seconds.
2. The doors will unlock, continue holding the unlock button for three more seconds, the trunk release will then activate.
The trunk release will be confirmed by one park light flash.
Note: The trunk release output will not activate when the ignition key is in the "On" position.
Car Finder Mode
1. Press and hold the # button for two seconds.
2. The system will flash the park lights and honk the horn(optional) five times.
3. This feature can help find your vehicle in a crowded parking lot.
Panic Mode
1. Press and hold the LOCK button for three seconds.
2. The park lights will flash and horn will honk (optional)
PANIC MODE DISABLE
- Press the LOCK button to disable the panic mode and to lock the doors.
- Press the UNLOCK button to disable the panic mode and unlock the doors.
- Panic Mode will stay activated until disabled by the remote transmitter.
Auxiliary 1 - Channel 3/ Button 5
Press and hold button #5. The doors will unlock and the siren will chirp twice, continue to hold the button and the
output will activate followed by one chirp. This output can be used for addition accessories such as sliding door
control and window roll up. See dealer for details.
Auxiliary 2 - Channel 4/ Button 6
Press and hold button 6. The doors will unlock and the siren will chirp twice, continue to hold the button and the
output will activate followed by one chirp. This output can be used for addition accessories such as sliding door
control and window roll up. See dealer for details.
2nd Car Operation
Press the # button at the same time as the command for the second car. This feature requires Special programming
&
&
&
2
&
Then
BASIC OPERATIONS
Lock doors. (Hold For Panic Mode)
=
Press again and hold for constant Lock.
Press Once to Unlock the doors.
=
Press & Hold for Trunk / Channel 3
Remote Start -(2 Times for Safety Start)
=
For 3 seconds to shut down the starter.
Enter Timer/ Temperature Mode
=
Owner's Guide
For 2 seconds for Car Finder
=
Hold 6 seconds to enter/ exit Service Mode
=
Then
To activate Aux 1(Sliding Door etc..)
&
=
=
&
To activate Aux 2(Sliding Door etc..)

Advertisement

loading

This manual is also suitable for:

2600m