Noise Information - Wickes BMS2102 Manual

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection.
The declared noise emission value has been measured in accordance with a standard test method and may be used for
comparing one tool with another.
The declared noise emission value may also be used in a preliminary assessment of exposure.
WARNING! The noise emissions during actual use of the power tool can differ from the declared value depending
on the ways in which the tool is used especially what kind of workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
If any anti noise accessories are used.
And the tool is being used as intended by its design and these instructions.
WARNING! To be accurate, an estimation of exposure level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times when the tool is switched off and when it is running
idle but not actually doing the job. This may significantly reduce the exposure level over the total working period, helping
to minimize your vibration exposure risk.
Always use a sharp blade.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti noise accessories.
9
L : 97 dB(A)
pA
L : 110 dB(A)
wA
3.0 dB(A)