Wickes BMS2102 Manual page 14

Fig. G3
4. SPINDLE LOCK BUTTON (SEE FIG. H)
The spindle lock button prevents the blade in the saw
from rotating. Depress and hold the spindle lock button
while installing, changing, or removing the blade.
5. SLIDING LOCK BUTTON (SEE FIG. I)
The slide rod lock knob is used to set the saw head
to the desired position depending on the width of the
workpiece.
1) Loosen the slide rod lock knob by turning it anti-
clockwise. Now you can slide the saw head forward
or backward freely.
2) Tighten the slide rod lock knob by turning it
clockwise.
6. ADJUSTING THE TABLE EXTENSIONS (SEE FIG. J)
After assemble the table extensions onto the saw, the
table extension can be adjusted to suit the workpiece.
Just pull the table extension outwards or push it inwards
to adjust the length.
2
1
Fig. G4-1
14
3
4
Fig. G4-2
2
1
Fig. H
Fig. I
Fig. J