Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Wickes PSC1904.1
Summary of Contents for Wickes PSC1904.1
- Page 1 CIRCULAR SAW 1400W PSC1904.1 223745...
-
Page 2: Table Of Contents
CONTENTS GENERAL POWER TOOL SAFETY WARNINGS COMPONENT LIST ACCESSORIES SYMBOLS TECHNICAL DATA NOISE INFORMATION OPERATING INSTRUCTIONS WORKING HINTS FOR YOUR CIRCULAR SAW MAINTENANCE TROUBLESHOOTING ENVIRONMENTAL PROTECTION DECLARATION OF CONFORMITY... -
Page 3: General Power Tool Safety Warnings
ORIGINAL INSTRUCTION GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings, 3. PERSONAL SAFETY a) Stay alert, watch what you are doing and use instructions, illustrations and specifications provided with this power tool. Failure to follow all common sense when operating a power tool. instructions listed below may result in electric shock, fire Do not use a power tool while you are tired and/or serious injury. - Page 4 or remove the battery pack, if detachable, from maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. the power tool before making any adjustments, changing accessories, or storing power tools. g) Use the power tool, accessories and tool bits Such preventive safety measures reduce the risk of etc.
- Page 5 motionless in the material until the blade comes to a complete stop. Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or kickback may occur. Investigate and take corrective actions to eliminate the cause of blade binding.
- Page 6 GENERAL SAFETY WARNINGS FOR YOUR LASER towards the eye. 4. Always ensure the laser beam is aimed at a sturdy work piece without reflective surfaces, e.g. wood or rough- coated surfaces are acceptable. Bright shiny reflective sheet steel or similar is not suitable for laser applications as the reflective surface may direct the laser beam back at the operator.
-
Page 7: Component List
COMPONENT LIST... -
Page 8: Accessories
Front handle Safety On/off switch Base plate On/off switch for laser Lock-off button Lower guard lever Upper fixed guard Vacuum adapter Base plate angle scale Soft grip handle Parallel guide lock knob On/off switch Base plate bevel lock knob Lock-off button Cutting mark, 45°... -
Page 9: Symbols
SYMBOLS Waste electrical products must not be To reduce the risk of injury, read all of this disposed of with household waste. Please instruction manual recycle where facilities exist. Check with your local authorities or retailer for recycling Warning advice. Wear ear protection Do not stare into beam Wear eye protection... -
Page 10: Noise Information
NOISE INFORMATION A weighted sound pressure : 89 dB(A) A weighted sound power : 100 dB(A) & K 3.0dB(A) Wear ear protection. VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 62841: Vibration emission value: a = 1.3 m/s (main handle) Vibration emission value: a = 1.1 m/s... -
Page 11: Operating Instructions
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for lengthways and crossways cutting of wood with straight cutting lines as well as bevel angles to 45° while resting firmly on the work piece. ASSEMBLY 1. - Page 12 2. VACUUM ADAPTER (SEE FIG. B) Fasten the vacuum adapter onto the dust extraction outlet until it latches. Secure in position using the screw provided. Connect a suitable vacuum hose to the adapter. NOTE: The vacuum adapter must not be mounted when no external dust extraction is connected.
- Page 13 Fig. D1 Fig. D2 OPERATION 1. HAND GRIP POSITION (SEE FIG. E) Always hold your saw firmly with both hands when operating. Fig. E Fig. F 2. SAFETY ON/OFF SWITCH (SEE FIG. F) Your switch is locked off to prevent accidental starting. Depress lock off button then on/off switch and release lock off button.
- Page 14 Fig. G2 Fig. G1 4. CUTTING GUIDE (SEE FIG. H1, H2) There is a cutting guide notch on the front of the base plate for use with the parallel guide. For straight cuts, use the 0º guide mark to align with your parallel guide scale.
-
Page 15: Working Hints For Your Circular Saw
6. USING THE LASER GUIDE (SEE FIG. I1, I2) Fig. I1 IMPORTANT NOTE: Never stare directly into the laser beam and never point the beam at anybody. The laser beam energy is extremely harmful to your eyes. The laser guide is for the purpose of precision cutting. Depress the on/off switch for laser, the laser guide then projects a visible red line on the workpiece surface. -
Page 16: Maintenance
MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. - Page 17 PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & IRELAND) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue = Neutral Brown = Live As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows.
-
Page 18: Declaration Of Conformity
DECLARATION OF CONFORMITY Wickes Building Supplies Limited Declare that this product: CIRCULAR SAW Description and SKU code: 223745 Complies with the following Directives and Regulations: 2006/42/EC, Machinery Directive 2014/30/EU, Electromagnetic Compatibility Directive 2011/65/EU & (EU)2015/863 (RoHS), Restriction of Hazardous Substances Directive... - Page 20 Customer Helpline 0345 2005409...