Program 711 - Macro Name Programming - Samsung ER 5215 Operator's Manual

Program 711 - Macro Name Programming

Up to ten function locations may be designated as Macro keys. You may wish to program a name for a
macro. For example if a macro executes a series of commands to produce daily reports, you can
program the descriptor "DAILY", so the macro can easily be identified. Macro names can also be
helpful when looking at keyboard layout information with the PC communication utility.
ER 5215 Electronic Cash Register
1. Turn the control lock to the P position.
2. To begin the program, enter 7 1 1, press the SBTL key.
7 1 1
3. Enter the number of the Macro you wish to program (1-10); press the X/TIME key.
X/TIME
4. Enter up to 12 three-character codes and press the X/TIME key (see "Descriptor Code
Chart" on page 101.)
Enter up to 12 three-
character codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
P-Mode Programming • 153