Program 300 - PLU Descriptor Programming
100 • P-Mode Programming
1.
Turn the control lock to the P position
2.
To begin the program, enter 3 0 0, press the SBTL key.
3
0
0
3.
Select the PLU you wish to program in one of the following ways:
Press a PLU key on the keyboard, or
PLU
Enter the number of the PLU and press the PLU key.
4.
Enter up to 12 three-character codes and press the X/TIME key. (See "Descriptor Code
Chart" on page 101.)
Enter up to 12 three-
character codes
5.
To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
X/TIME
ER 5215 Electronic Cash Register