Table of Contents
Advertisement
Memory Allocation Program
Once you have determined the memory variable you wish to set, you can set them in the memory
allocation program. If you attempt to allocate more options than memory, the message "MEMORY
ALLOCATION SIZE OVER" will print on the receipt and journal.
Memory Allocation Program Scan
You can read the current memory allocation with the following sequence:
78 • S-Mode Programming
1.
Turn the control lock to the S position.
2. To Allocate Memory, enter 6 0 and press the SBTL key.
6
0
SBTL
3. Refer to the chart below and enter a digit to represent allocated area and press the
X/TIME key.
X
X/TIME
4.
Enter the Number of the
allocated Memory size. If the check type is soft, enter 0; if the check type is hard, enter 1.
5.
Repeat from step 3 to allocate another area, or press the CASH key to finalize the
program. Upon finalization, the printer will print the new allocation.
CASH
1.
Turn the control lock to the S position.
2.
Enter 6 0, press the SBTL key and then press the CASH key.
6
0
SBTL
DATE 10/15/2002 SUN
================================
TTL AVALI : 67572
TTL USED : 66540
ALLOCATED PLU IS :900
ALLOCATED CHECK IS :10
ALLOCATED CHK LINE IS :30
CHECK IS :HARD(N),SOFT(Y):Y
CLERK 1
No.000001
X
Allocated Area
1
PLU
2
CHECK#
3
SOFT CHECK LINES
4
CHECK TYPE : Hard(1), Soft(0)
CASH
CASH
TIME 08:37
00001
ER 5215 Electronic Cash Register
Advertisement
Table of Contents
