Advertisement
Available languages
Available languages
Transport and storage
Cover
Plastic white
Genuine
glass white
Genuine
glass black
Fixing channel
Pipe conduit unit
Duo connection piece
Protective tube (see illustIl-
lust. 8 on page 30)
5.
Transport and storage
Transport the product in its original packaging.
Store the product under the following condi-
tions:
Temperature
-25°C to +70°C
range
Relative air
max. 70%
humidity
Particles
Store dry and free from
dust
Mechanical
Protected from mechani-
influences
cal agitation
Radiation
Protected from UV rays
and direct sunlight
Chemical
Do not store together
influences
with solvents, chemicals,
acids, fuels or similar
substances
6.
Installation
6.1 General installation advice
Note the following prior to installation:
• The lower edge of the "Unibox TQ-RTL
R-Tronic" must be at least 20 cm above the
finished floor.
• The front face of the "Unibox TQ-RTL
R-Tronic" must be level with the finished
wall.
30
1022776
1022774
1022775
• The opening of the wall box unit must face
downward.
1022652
• The thermostat must not be influenced by
other heat sources.
1022653
• Use the enclosed brackets to align and fix
1022650
the "Unibox TQ-RTL R-Tronic".
1022655
• There is a blue dot on the wall box unit. A
1501184
hole can be drilled at this location in order
to feed through a cable.
• If necessary, use an empty pipe for cable
routing.
NOTICE
Risk of damage due to lubri-
cants
Seals may be destroyed by greasing
agents or oil.
f Do not use any greasing agents or
f Flush any dirt particles or grease or
f Consider the latest technical status
1
2
3
4
5
6
7
Illust. 8: Installation cross section
Unibox TQ-RTL R-Tronic
Should the wall not have been
finished, take the plaster and tile
thickness into account.
oil for the installation.
oil residues out of the pipework.
(e.g. VDI 2035), when choosing the
operating fluid.
102273880-V01.08.2019
Advertisement
