Advertisement
OWNER'S MANUAL - BASIC SETUP DIMENSIONS & ASSEMBLY NOTES
It is critically important that you start with square and level footings, concrete pad or deck to
attach your structure
Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step.
•
Using incorrect hardware may result in improper assembly
Remember to double check for underground utilities and overhead electrical lines
•
Post mounts are provided with your structure which allows you to permanently install your structure to a
pre-existing or new wood or concrete surface. See Anchor Instructions for further details and recommendations.
The hardware to attach the post mounts to the structure is included.
•
The hardware to mount the structure permanently to a concrete surface is included.
•
The hardware to mount the structure permanently to a wood deck is NOT included and will need to be purchased
•
separately. You must ensure there is ample structural support under the deck before permanently attaching.
BELOW MEASUREMENTS BASED ON ANGLE TABLE CONFIGURATION, STANDARD BAR HEIGHT
2
Advertisement
