Pro-Form PFTL39921.0 User page 9

2. Make sure that the power cord is unplugged.
Carefully raise the Right Upright (81) to the posi-
tion shown.
Next, start a 3/8" x 2 1/4" Screw (1) and a
3/8" x 3/4" Screw (3) into the Right Upright (81)
and the Base (90) as shown; then, tighten both
Screws.
Repeat this step on the left side of the
treadmill.
3. Identify the Left and Right Handrail Bottoms
(73, 74), and slide them onto the Uprights
(80, 81) as shown.
4. Set the console assembly (A) face down on
a soft surface to avoid scratching the console
assembly.
Attach the Right and Left Trays (95, 94) with six
#8 x 3/4" Screws (29); start all six Screws, and
then tighten them. Do not overtighten the
Screws.
2
3
73
4
29
95
A
9
81
3
90
74
80
81
29
29
94
1
29