Pro-Form PFTL39921.0 User page 19

THE SETTINGS MODE
1. Select the settings mode.
To select the settings mode,
press the gear button (P).
The first settings screen will
appear in the display. Note: If
you have selected a work-
out, you may need to press
the Stop button repeatedly
to return to the home screen before selecting the
settings mode.
2. Navigate the settings mode.
While the settings mode is selected, you can
navigate through several settings screens. Press
the Stop button repeatedly to select the desired
settings screen.
3. Change settings as desired.
Software Version Number—The software version
number will appear in the display.
Incline System Calibration—The letters CAL will
appear in the display. If the incline system is not
functioning properly, it may need to be calibrated.
To calibrate the incline system, press the Incline
increase or decrease button. The treadmill will
automatically rise to the maximum incline level and
then return to the minimum level. When the tread-
mill stops moving, the incline system is calibrated.
Note: Occasionally, the incline calibration may
run automatically when you turn on the tread-
mill. Wait for the calibration to be completed
before attempting to use the treadmill.
Display Test—This screen is intended to be used
by service technicians to identify whether the
display is working correctly.
Button Test—This screen is intended to be used
by service technicians to identify whether a certain
button is working correctly.
Total Time—The word TIME will appear in the
display. The display will show the total number of
hours that the treadmill has been used.
P
Total Distance—The letters MI or KM will appear
in the display. The display will show the total
distance (in miles or kilometers) that the walking
belt has moved.
Contrast Level—The currently selected contrast
level will appear in the display. Press the Incline
increase and decrease buttons to adjust the
contrast level.
Demo Mode—The currently selected demo mode
option will appear in the display. The console
features a demo mode, designed to be used if the
treadmill is displayed in a store. If the demo mode
is turned on, the console will not turn off and the
display will not be reset when you fi nish exercising.
Press the Speed increase button repeatedly to
select a demo mode option. To turn on the demo
mode, select DON. To turn off the demo mode,
select DOFF.
4. Exit the settings mode.
Press the gear button (P) to exit the settings mode.
19