Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jetson BALANCE
Summary of Contents for Jetson BALANCE
- Page 1 BALANCE BIKE -MANUAL-...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction Included in the Box Features and Specs Assembly Adjusting the Seat Riding the Balance Safety Warnings Warranty Product Registration... -
Page 3: Introduction
This product manual can help you understand, use, and maintain your Balance. In order to avoid danger caused by collisions, falls, and loss of control, please use caution and learn how to ride the Balance safely. Jetson and authorized dealers cannot be held liable for injury or damage caused from riding the Balance. -
Page 4: Included In The Box
INCLUDED IN THE BOX • Balance Bike (Partially Assembled) • 2x Bearing Bushings • 2x Caps • 1x Stem Clamp • 1x Allen Wrench 1. Front Wheel Handlebar 2. Front Fork 5. Seat 6. Rear Wheel 3. Front Frame... -
Page 5: Features And Specs
FEATURES AND SPECS MODEL: BALANCE WHEEL SIZE: 10” PRODUCT WEIGHT: 9.5 LBS WEIGHT LIMIT: 75 LBS RECOMMENDED AGE: 2+ PRODUCT DIMENSIONS: 33” x 17” x 23” FRAME: ALUMINUM ALLOY ASSEMBLY 1. Insert the two Bearing Bushings onto the Front Frame. - Page 6 2. Place a Cap onto the Front Fork. Then, slide the Front Fork through the Front Frame until it rests on the Cap and Bearing Bushing. Place the remaining Cap onto the top of the Front Fork.
- Page 7 3. Place the Stem Clamp on the top of the Front Fork and place the Handlebar into the Stem Clamp. Tighten the Stem Clamp using the included Allen Wrench. Make sure the Handlebar is tight and secure. Slide the Handlebar into the Stem Clamp. Tighten the Stem Clamp using the included Allen Wrench.
-
Page 8: Adjusting The Seat
Make sure the Handlebar is tight and secure. ADJUSTING THE SEAT 1. To adjust the Seat, flip over the Balance so the bottom of the Seat is facing up. Use a screwdriver to remove the four screws at... - Page 9 2. Remove the four bolts that connect the Seat Adjuster to the bike frame. Seat Adjuster 3. Flip the Seat Adjuster so it rests on the Seat Pegs.
- Page 10 Seat 4. Place the four bolts and nuts back into the Seat Adjuster and tighten. 5. Place the Seat over the Seat Adjuster. Run the four screws back through the bottom of the Seat and tighten.
-
Page 11: Riding The Balance
RIDING THE BALANCE LEAN TO STEER The Lean to Steer function makes it easy to steer the Balance, just shift your weight in the direction you would like the Balance to go. Be careful to not lean too hard on the handlebars. -
Page 12: Safety Warnings
Ride at your own risk and use common sense. Any rider that is unable to fit comfortably on the product should not attempt to ride it. All decisions on who is allowed to ride the Balance should be made based on their maturity, skill, and ability to follow the rules. - Page 13 ADDITIONAL OPERATION CAUTIONS Do not lift the Balance off the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, which may cause injury to yourself or others nearby. Do not jump on or off the Balance, and do not jump while using it.
-
Page 14: Warranty
• Jetson® makes no warranty with respect to products or trade accessories not made by Jetson®, including, but not limited to, motors, tires, wheels, and batteries, such products or trade accessories, such items being subject to the original manufacturer’s warranty, if any. -
Page 15: Product Registration
For myself For my child For my grandchild Gift for someone else (adult) Gift for someone else (child) How did you hear about the Jetson Balance?: ______________________________________________ _____________________________________________________________________________________ Complete this form and mail it to: Attention: Product Registration Jetson Electric Bikes... - Page 16 BALANCE BIKE...
Need help?
Do you have a question about the BALANCE and is the answer not in the manual?
Questions and answers