APRILIA SHIVER 750 ABS 2010 Manual page 45

Table of Contents

Advertisement

Press the MODE selector central part to
store the set value and to exit the clock
adjustment function.
GEAR SHIFT THRESHOLD
The gear shift threshold can be set in this
mode. The main screen shows the mes-
sage "GEAR SHIFT THRESHOLD".
Each time the MODE selector is pressed
to the right, the threshold value increases
by 100 RPM; contrariwise, each time the
MODE selector is pressed to the left, the
threshold value decreases by 100 RPM.
02_30
After reaching either the highest or lowest
limit, the next time the selector is pressed
will produce no effect.
The procedure ends when the MODE se-
lector is pressed at the central position,
which stores the set value, the pointer
goes back to zero and the instrument
panel goes back to the configuration
menu.
When the battery is first activated, the in-
strument panel is set to the run-in rev
value. Afterwards, the last set value is
displayed:
RUN-IN REVOLUTIONS: 6000
rpm
MINIMUM REVOLUTIONS:
5000 rpm
links van de keuzeschakelaar MODE ver-
laagt de waarde van de minuten.
Een druk op het centrale deel van de keu-
zeschakelaar MODE slaat de ingestelde
waarde op, en wordt de modaliteit van de
regeling van de klok verlaten.
SCHAKELLIMIET
In deze functie stelt men de waarde van
de schakellimiet in. Het hoofdscherm ver-
schijnt met de melding "SCHAKELLI-
MIET".
Bij elke druk naar rechts van de MODE
schakelaar verhoogt de limietwaarde met
100 RPM, en viceversa bij elke druk naar
links van de MODE schakelaar verlaagt
de limietwaarde met 100 RPM.
Bij het bereiken van de limiet, onderste of
bovenste, heeft elke volgende druk op de
schakelaar geen enkel effect.
De handeling eindigt met een druk op de
MODE schakelaar in de centrale positie,
waardoor de ingestelde waarde wordt
opgeslagen, de wijzer keert terug naar
nul, en het dashboard gaat terug naar de
pagina van het menu van de configuratie.
Bij de eerste aansluiting van de accu
wordt het dashboard ingesteld op de
waarde van de toeren van de proefperi-
ode, en bij de volgende aansluitingen
wordt het ingesteld op de laatst ingestel-
de waarde:
TOERENTAL VAN DE PROEF-
PERIODE: 6000 toeren/min
(rpm)
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shiver 750 2010

Table of Contents