D-Link DIR-878 User Manual page 56

Section 3 - Configuration
Status:
Enable or disable the DHCP server. I
DHCP IP
Enter the starting and ending IP addresses for the DHCP server's IP
Address Range: assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
DHCP Lease Enter the length of time for the IP address lease in minutes.
Time:
Always
Enable this feature to broadcast your networks DHCP server to LAN/
Broadcast: WLAN clients.
WAN Port You may set the port speed of the Internet port to 10 Mbps, 100
Speed: Mbps, 1000 Mbps, or Auto (recommended).
UPnP:
Enable or disable Universal Plug and Play (UPnP). UPnP provides
compatibility with networking equipment, software and peripherals.
IPv4 Multicast Enable to allow IPv4 multicast traffic to pass through the router from
Streams:
the Internet.
IPv6 Multicast
Enable to allow IPv6 multicast traffic to pass through the router from
Streams: the Internet.
Click Save when you are done.
D-Link DIR-878 User Manual 52