Appliqué; Appliqué Sharp Curves - Brother 882-D30 Operation Manual

SEWING THE STITCHES
<Normal fabric>
a Wrong side of fabric
b Right side of fabric
l
Sew with the fold of the hem against the
presser foot guide.
m
Press the "Start/Stop" button to stop sewing
when you are finished, and raise the presser
foot and needle to pull the fabric under the
presser foot towards the back of the
machine.
Note
• Be sure to pull the fabric towards the back
of the machine after sewing. If you pull the
fabric toward side or forward, the presser
foot may be damaged.
n
Remove the basting stitching and reverse
the fabric.
1
a Wrong side of fabric
b Right side of fabric
Appliqué
a
Use a temporary spray adhesive, fabric glue
or a basting stitch to attach the appliqué to
the fabric.
* This will keep the fabric from moving during
sewing.
a Appliqué
b Fabric glue
S-48
b
*
c
a Appliqué material
2
a Needle drop position
■ Appliqué Sharp Curves
Stop the machine with the needle in the fabric
outside the appliqué. Raise the presser foot and turn
the fabric a little bit at a time while sewing for an
attractive finish to the seam.
Select or .
Adjust the stitch length and width to correspond to
the appliqué shape, size, and quality of material (see
page S-10).
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" on page S-67.
Attach presser foot "J". Check that the
needle drops slightly off the edge of the
appliqué, then start sewing.