Advertisement
10. IMPORTANT: To avoid damaging the Pulse
Crossbar (5), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Tighten four #10 x 3/4" Screws (9) with four 1/4"
Star Washers (26) into the Pulse Crossbar (5)
and the left and right Handrails (84); start all
four Screws, and then tighten them.
See step 9. Tighten the four 1/4" x 1/2" Screws
(2).
11. Identify the Left and Right Handrail Inserts (79, 31).
Attach the Left Handrail Insert (79) to the left
Handrail (84) with three #8 x 3/4" Screws (4).
Note: Slide the Left Handrail Insert up against
the console assembly (F) before you tighten
the Screws.
Attach the Right Handrail Insert (31) in the
same way.
10
9
26
84
11
F
79
84
4
13
9
26
5
84
31
84
4
Advertisement
