Ec Declaration Of Conformity - Husqvarna 435e II Operator's Manual

EC Declaration of conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares under sole responsibility that
the chainsaw for forest service Husqvarna 435 II, 435e
II, 440 II, 440e II from 2016's serial numbers and
onwards (the year is clearly stated in plain text on the
type plate with subsequent serial number), are in
conformity with the requirements of the COUNCIL'S
DIRECTIVES:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU.
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
• of June 8, 2011 "on the restriction of the use of
certain hazardous substances in electrical and
electronic equipment" 2011/65/EU.
The following standards have been applied: EN ISO
12100:2011, EN ISO 14982:2009, EN ISO
11681-2:2011, EN 50581:2012.
Notified body: 0404, RISE SMP Svensk Maskinprovning
AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried
out EC type examination in accordance with the
machinery directive's (2006/42/EC) article 12, point 3b.
The certificates for EC type examination in accordance
with annex IX, has the number: 0404/09/2012 – 435 II,
435e II, 440 II, 440e II.
In addition, SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has certified conformity
with annex V of the Council's Directive of May 8,
2000 "relating to the noise emissions in the
environment" 2000/14/EC. The certificate has the
number: 01/161/075 - 435 II, 435e II, 01/161/074 - 440
II, 440e II.
For information relating to noise emissions, refer to
Technical data on page 29 .
The supplied chainsaw conforms to the example that
underwent EC type examination.
Huskvarna, 2016-03-30
Pär Martinsson, Development manager (authorized
representative for Husqvarna AB and responsible for
technical documentation.)
32
EC Declaration of Conformity
1270 - 005 - 21.06.2021