Husqvarna 435e II Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Chainsaw
  5. 435e II
  6. Operator's manual
Husqvarna 435e II Operator's Manual

Husqvarna 435e II Operator's Manual

Hide thumbs Also See for 435e II:
Table of Contents

Advertisement

Quick Links

Download this manual
435 II, 435e II, 440 II, 440e II
EN
Operator's manual
10-32

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna 435e II

Summary of Contents for Husqvarna 435e II

  • Page 1 435 II, 435e II, 440 II, 440e II Operator's manual 10-32...
  • Page 5 45º-70º...
  • Page 7 PITCH =...

  • Page 10: Table Of Contents

    EC Declaration of Conformity........32 Introduction Product description Intended use The Husqvarna 435 II, 435e II, 440 II, 440e II are This chainsaw for forest service is designed for forest chainsaw models with a combustion engine. work such as felling, limbing and cutting.

  • Page 11: Safety

    Euro V Emissions (Fig. 12) Chain brake, engaged (right). Chain brake, disengaged (left). WARNING: Tampering with the engine yyyywwxxxx The rating plate shows se- voids the EU type-approval of this product. rial number. yyyy is the production year and ww is the production week.
  • Page 12 Do not • Lack of concentration can lead to kickback if the hesitate to contact your dealer or Husqvarna if you kickback zone of the bar accidentally touches a have any questions about the use of the product. We branch, nearby tree or some other object.
  • Page 13 Use the start/stop switch to stop the engine. the product on page 22 . (Fig. 25) • If the safety devices are defective, speak to your Husqvarna servicing dealer. WARNING: The start/stop switch automatically goes back to start position. To Chain brake and front hand guard...

  • Page 14: Assembly

    • Fuel and fuel vapour are highly flammable and can maintenance increases the life of the product and Introduction cause serious injury when inhaled or allowed to decreases the risk of accidents. Refer to on page 14 for instructions. come in contact with the skin. For this reason observe caution when handling fuel and make sure •...

  • Page 15: Operation

    • If Husqvarna two-stroke oil is not available, use a two-stroke oil of good quality for air-cooled engines. 7. Make sure that the muffler is correctly attached and Speak to your servicing dealer to select the correct that it is not damaged.
  • Page 16 5. Carefully shake the fuel mixture. • Use Husqvarna chain oil for maximum saw chain life and to prevent negative effects on the environment. If Husqvarna chain oil is not available, we CAUTION: Do not mix fuel for more recommend you to use a standard chain oil.
  • Page 17 use the product when the kickback occurs that causes 1. Move the front hand guard forward to engage the the direction of the movement. chain brake. (Fig. 41) 2. Pull the start/stop switch (A) out and up, to set it in (Fig.
  • Page 18 a) If you start your product with a cold engine, pull WARNING: Do not cut trunks in a the starter rope handle until the engine fires. pile. That increases the risk of kickback and can result in serious injury or death. Note: You can identify when the engine fires through a "puff"...
  • Page 19 To use the tree felling technique Do not try to pull the product out by hand. This can result in injury when the product suddenly breaks free. WARNING: You must have experience to fell a tree. If possible, engage in a training To use the limbing technique course in chainsaw operation.
  • Page 20 To fell a tree b) Cut on the pull stroke until ⅓ of the trunk is left. Husqvarna recommends you to make the directional c) Pull the guide bar 5-10 cm/2-4 in rearward. cuts and then use the safe corner method when you fell d) Cut through the remaining of the trunk to a tree.

  • Page 21: Maintenance

    To cut trees and branches that are in tension occur if you are in an incorrect position or if you cut incorrectly. 1. Figure out which side of the tree or branch that is in tension. 6. If you must cut across tree/branch, make 2 to 3 cuts, 1 in.
  • Page 22 Daily maintenance Weekly maintenance Monthly maintenance Clean and do a check of the chain Remove burrs from the edges of the Clean the external parts of the carbu- To do a check of the To do a check of brake. Refer to guide bar.
  • Page 23 To do a check of the front hand guard and the To do a check of the chain catcher chain brake activation 1. Make sure that there is no damage on the chain catcher. 1. Make sure that the front hand guard is not damaged and that there are no defects, such as cracks.
  • Page 24 housing. If you are not careful, it can the idle speed to the recommended idle speed. Refer to Technical data on page 29 . eject and cause injuries. Use protective glasses and protective gloves. CAUTION: If the saw chain rotates at 6.
  • Page 25 (Fig. 113) the guide bar and saw chain combination recommended It is not easy to sharpen a saw chain correctly without by Husqvarna. This is necessary to keep the safety the correct equipment. Use Husqvarna file gauge. This Accessories on page functions of the product.
  • Page 26 1. Use a flat file and a depth gauge tool to adjust the (Fig. 123) depth gauge setting. Only use Husqvarna depth gauge tool to get the correct depth gauge setting and • Regularly do a visual check of the degree of wear on bevel for the depth gauge.

  • Page 27: Troubleshooting

    To examine the cutting equipment • Replace the fuel filter yearly or more frequently if necessary. 1. Make sure that there are no cracks in rivets and links and that no rivets are loose. Replace if it is CAUTION: necessary. (Fig. 125) Contamination in the tanks causes malfunction.

  • Page 28: Transportation And Storage

    Product part to examine Possible cause Action Fuel tank Incorrect fuel type. Drain the fuel tank and fill with cor- rect fuel. The fuel tank is filled with chain oil. If you have tried to start the product, speak to your servicing dealer. If you have not tried to start the product, drain the fuel tank.

  • Page 29: Technical Data

    CAUTION: If the saw chain and guide bar are not cleaned, they can become rigid or blocked. Technical data Technical data 435 II 435e II 440 II 440e II Engine Cylinder displace- 40.9 40.9 40.9 40.9...

  • Page 30: Accessories

    Accessories Recommended cutting equipment Kickback and guide bar nose radius Chainsaw models Husqvarna 435 II, 435e II, 440 II, For sprocket nose bars the nose radius is specified by 440e II have been evaluated for safety according to EN the number of teeth, such as 10T. For solid guide bars...
  • Page 31 0.325 1.3/0.050 Husqvarna Pixel Husqvarna file gauge to restore the sharpness of the saw chain. The part numbers are given in the table Pixel is a guide bar and saw chain combination that is below. more light weight and designated to offer more energy If you are not sure of how to identify what saw chain you efficient use by cutting narrow cuts.

  • Page 32: Ec Declaration Of Conformity

    V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The certificate has the number: 01/161/075 - 435 II, 435e II, 01/161/074 - 440 II, 440e II. For information relating to noise emissions, refer to Technical data on page 29 .
  • Page 33 1270 - 005 - 21.06.2021...
  • Page 34 1270 - 005 - 21.06.2021...
  • Page 35 1270 - 005 - 21.06.2021...
  • Page 36 Original instructions 1159799-26 2021-06-29...

This manual is also suitable for:

435 ii440 ii440e ii

Table of Contents