Network/Ports - Sharp MX-B468P User Manual

Use printer menus

Network/Ports

Network Overview
Menu item
Active Adapter
Auto*
Standard Network
Wireless
Network Status
Display Network Status on
Printer
Off
On*
Speed, Duplex
IPv4
All IPv6 Addresses
Reset Print Server
Network Job Timeout
Off
On* (90 seconds)
Banner Page
Off*
On
Enable Network Connections
Off
On*
Enable LLDP
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Wireless
Note: This menu is available only in printers connected to a Wi‑Fi network or printers that have a wireless
network adapter.
Description
Specify the type of the network connection.
Note: Wireless is available only in printers connected to a wireless network.
Show the connectivity status of the printer network.
Show the network status on the display.
Show the speed of the currently active network card.
Show the IPv4 address.
Show all IPv6 addresses.
Reset all active network connections to the printer.
Note: This setting removes all network configuration settings.
Set the time before the printer cancels a network print job.
Print a banner page.
Enable the printer to connect to a network.
Enable Link Layer Discovery Protocol (LLDP) in the printer.
70