Sharp MX-B468P User Manual page 61

Use printer menus
Setup
Menu item
Printer Language
PCL Emulation
PS Emulation*
Job Waiting
Off*
On
Job Hold Timeout
0–255 (30*)
Download Target
RAM*
Disk
Resource Save
Off*
On
Print All Order
Alphabetical*
Newest First
Oldest First
Note: An asterisk (*) next to a value indicates the factory default setting.
Quality
Menu item
Print Resolution
600 dpi
1200 Image Q*
2400 Image Q
1200 dpi
300 dpi
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer language.
Note: Setting a printer language default does not prevent a software
program from sending print jobs that use another printer language.
Preserve print jobs requiring supplies so that jobs not requiring the missing
supplies can print.
Note: This menu item appears only when an intelligent storage drive
(ISD) is installed.
Set the time in seconds that the printer waits for user intervention before
it holds jobs that require unavailable resources.
Note: This menu item appears only when an ISD is installed.
Specify where to save all permanent resources that have been
downloaded to the printer.
Note: This menu item appears only when an ISD is installed.
Determine what the printer does with downloaded resources when it
receives a job that requires more than the available memory.
Notes:
•
When set to Off, the printer retains downloaded resources only until
memory is needed. Resources associated with the inactive printer
language are deleted.
•
When set to On, the printer preserves all the permanent
downloaded resources across all language switches. When
necessary, the printer shows memory full messages instead of
deleting permanent resources.
Specify the order when you choose to print all held and confidential jobs.
Note: This menu item appears only when an ISD is installed.
Description
Set the resolution for the printed output.
61