Replacing The Battery - Braun ThermoScan 3 Manual

How to change temperature between
°F and °C
Make sure the thermometer is turned off.
Press and hold down the "start" button.
Keep holding down the start button and after
about 3 seconds the display will start to cycle
between temperature scales (°F or °C).
Release the start button when the desired scale
is shown. This will reset the thermometer to the
new temperature scale.

Replacing the battery

The thermometer is supplied with one 3V Lithium cell battery
(type 2032). Insert new battery when the low battery symbol
appears on the display.
The battery door design is
intended to prevent a small
child from easily opening the
battery door to address a
possible choke hazard. Open
the battery compartment by
inserting a narrow pointed object such as a ball point pen or
paperclip into the small hole above the battery door (8). While
pressing into the hole slowly slide back the battery door with
the other hand.
To close battery door align the tabs along the side of the
battery into the battery compartment and slowly slide back
into position until the door clicks into its locked position.
WARNING: Chemical Burn Hazard. Keep batteries away
from children.
This product contains a lithium button / coin cell battery. If a
new or used lithium button/coin cell battery is swallowed or
10