Hussmann SPECIALTY TY3-3X4.5E-R User Manual page 9

Close-off Removal
The side close-off panels are held in place by upper and
lower tabs located on the underside of the tub and bottom
base channel near the bottom of the case. See image
below for exact close-off tab locations.
Installation (Cont'd)
Closeoff Tabs
Step 1
Slide bottom of close-off in upward motion to remove
close-off panel slots from lower close-off tabs.
Step 2
Pull Close-off in outward then downward motion to com-
pletely remove side panel close-off
BEFORE SERVICING
ALWAYS DISCONNECT ELECTRICAL
POWER AT THE MAIN DISCONNECT
WHEN SERVICING OR REPLACING ANY
ELECTRICAL COMPONENT.
This includes (but not limited to) Fans, Heaters
Thermostats, and Lights.
Once Close-off panel is removes, this now provides ac-
cess to internals such as condensing unit, evap pan and
electrical junctions.
To replace close-off panels, simply reverse the listed steps.
9
2
1