Flywheel And Ignition Coil - LONCIN LC2V80FD Maintenance Manual

Chapter V Disassembly & Repair Chapter V Disassembly & Repair

5-2-6 Flywheel and ignition coil

a. Disassembly/assembly
Starting engine part Starting engine part
Air guide sleeve Air guide sleeve
Inner hexagon Inner hexagon
screw
M6×20
Flywheel Flywheel
Disassembly: Disassembly:
Disassemble isassemble the ignition coil prior to the
disassembly of flywheel; disassembly of flywheel
Do not tap the flywheel with hammer and Do not tap
disassemble it with a commercially disassemble it with a commercially
available flywheel puller. available flywheel puller
Flywheel puller
Assembly: Assembly:
Clean the conical part of the crankshaft Clean the conical part of the crankshaft
and flywheel without engine oil or dirt flywheel without engine oil or dirt
before installation. before installation
Flange bolt M8 × 95
Torque: (22 ~ 28) N•m
Charging coil
- 44 -
Ignition coil Ignition coil
Assembly: Assembly:
Prior Prior to to installation,
check if the insulation is check if the insulation is
cracked or damaged so as cracked or damaged so as
to avoid electric leakage. to avoid electric leakage
Flange bolt M6 × 30
Torque: (8 ~ 12) N•m
Flywheel bolt M12 × 35
Torque: (80 ~ 100) N•m
Prevent the rotation of
flywheel
during the disassembly
and assembly.
Blade wheel Blade wheel
Assembly: Assembly:
Align two cams at the inner side two cams at the inner side
with the small holes on the with the small holes on the
flywheel. flywheel.
Avoid Avoid excessive excessive force force
disassembly and assembly so as to disassembly and assembly so as to
avoid breaking the blade avoid breaking the blade.
with tool
in in