Section 1
Introduction
6
•
Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
•
The example figures illustrate the IEC display variant.
•
Menu paths are presented in bold.
Select Main menu/Settings.
•
LHMI messages are shown in Courier font.
To save the changes in non-volatile memory, select Yes and press
•
Parameter names are shown in italics.
The function can be enabled and disabled with the Operation setting.
•
Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
•
IED input/output messages and monitored data names are shown in Courier font.
When the function starts, the START output is set to TRUE.
1MRS757820 B
Recloser Protection and Control RER615
Communication Protocol Manual
.