ABB Relion RER615 DNP3 Communication Protocol Manual page 9

1MRS757820 B
Section 1
1.1
1.2
Recloser Protection and Control RER615
Communication Protocol Manual
Introduction
This manual
The communication protocol manual describes a communication protocol
supported by the IED. The manual concentrates on vendor-specific implementations.
Intended audience
This manual addresses the communication system engineer or system integrator
responsible for pre-engineering and engineering for communication setup in a
substation from an IED perspective.
The system engineer or system integrator must have a basic knowledge of
communication in protection and control systems and thorough knowledge of the
specific communication protocol.
Section 1
Introduction
3