HR 12 M
ANUAL
1.4
Components and accessories
Manual version 1.0 (15-07-2018)
1.4.1 Components supplied
Note:
n
The illustration shows the unit from above.
The unit consists of the following components:
•
supply fan 1
•
extract fan 2
•
fresh air filter 3
•
extract air filter 4
•
heat exchanger 5
•
Electronics box 6
•
Air dampers to fresh air7
•
Pressure switch over the heat exchanger
•
Pressure switch over the fresh air filter
1.4.2 Accessories
•
Flexible manchets 0
•
Pressure switch over extract air filter @
•
Dirty filter warning lamp (during transport, this is stored in
the electronics module)
•
b-touch operating panel with Biddle control cable
•
Sensor for control:
-
CO
sensor
2
•
Smoke detector
1.4.3 Components not supplied
The following components required for installation must be
obtained from third parties:
•
threaded rods M10
•
mains power cable
•
control cable to building management system
•
drain pipe with trap for condensate drainage
en
I
NTRODUCTION
en-9