Advertisement
2
. . Installation
2.1
Inspection on delivery
2.2
Hanging the unit up
Manual version 1.0 (15-07-2018)
Warning:
w
Installation activities may only be performed
by technical staff qualified for this purpose.
Warning:
w
Before starting installation: read the safety
instructions.
See also:
1.5
"Safety instructions" on page 10
•
Check the unit and the packaging to ensure that they have
been delivered in good order. Notify the driver and the
supplier immediately if any shipping damage is detected.
•
Ensure that all components are present. Notify supplier of
any missing parts immediately.
See also:
1.4
"Components and accessories" on page 9
2.2.1 Determining the location of the unit
•
Make sure that the structure from which the unit is about
to be suspended can bear at least 4 times the weight of the
unit. The unit's weight is indicated on its type plate.
•
The distance between the floor and the unit's underside
must be more than 2.7 m due to the accessibility of the
inspection hatch.
•
Make sure that the electronics and the pressure meters on
the unit's long side remain easily accessible.
For this, keep 50 cm of space free on the side of the elec-
tronics box.
en
en-11
Advertisement
