Advertisement
HR 12 M
ANUAL
21. User interface options
31. Auto: fan speed
Manual version 1.0 (15-07-2018)
Display on/off button
The unit can be switched ON and OFF manually. This can also
be done via the internal timer or via an external release signal
on the unit. In this case you can disable the manual on/off
option. The on/off button is then not displayed on the Home
screen.
Temperature display
By default, the room temperature (exhaust air) is displayed.
With this function, you can select another temperature to dis-
play or switch off the temperature display.
If the temperature display is switched off, there is no tempera-
ture control.
Temperature control OFF option
Use this function to enable or disable the option for the user
to switch the temperature controlON/OFF manually.
Error display
Some error messages may be caused by external factors such
as the central heating system and do not necessarily have an
influence on the functioning of the unit.
Use this function to suppress these messages. Safety-related
warnings will always be displayed.
Note:
n
These settings only have influence on usage in the
automatic mode.
Maximum fan speed
To restrict the noise level, the maximum fan speed can be lim-
ited.
Use of this function can reduce comfort.
Minimum fan speed
In order to increase the level of comfort, a minimum fan speed
per operation:
Note:
n
Set a lower value than that for the maximum fan
speed. In the event of conflicting values, the set
maximum fan speed takes priority.
O
-
PERATION VIA B
TOUCH
en-33
en
Advertisement
