Advertisement
en
S
ERVICE
7.8
Updating the software
en-60
Biddle is working continuously on improving its products and
recommends that you update the software of the control
panel and of the control circuit board when updates become
available. Consult Biddle's website for availability.
7.8.1 What you need.
Before updating the software of the control panel, check that
you have the following:
•
An empty USB flash drive. The USB flash drive must be for-
matted for FAT or DOS. Do not use a USB hard disk for
the software update.
•
A PC with Internet access.
7.8.2 Step 1: Check the current software version
Before you update the software of the control panel or of the
control circuit board, you must check the existing software
version. If the software version is the same as that of the most
recent update file on Biddle's website, you do not need to
update the software.
1. Press
menu
in the Home screen.
2. Select Maintenance. The version of the current software is
displayed in the status overview.
7.8.3 Step 2: Download the most recent software
1. Connect the USB flash drive to a USB port on your PC.
2. On your PC, go to Biddle's website and look under Down-
loads.
3. Look for your product and the available software for your
unit.
4. If the software version is more recent than the version on
your control panel, click on the software update.
5. Accept the licence agreement and save the file to the main
directory of the USB flash drive.
6. Disconnect the USB flash drive from the PC.
H
EAT RECOVERY UNIT
Advertisement
