Panasonic KX-TVM50 Installation Manual page 50

2.7 Installing Optional Cards—KX-TVM50
2.7.2 2-Port Digital Expansion Card (KX-TVM503)
Each KX-TVM503 adds 2 ports to the VPS which can be used for DPT Integration.
KX-TVM503 cards can be installed in slots 2 and 3 of the VPS.
Integration Type
DPT Integration
Included Items
Screws × 2
Installation
1.
Position the front of the card so that the jacks fit in the open slot. Holding the card firmly in place,
lower the other end of the card so that the card's hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in
damage to the VPS.
Extension Bolt
50 Installation Manual
Basic Configuration
No. of Jacks
1
1
2
Maximum Configuration
No. of Ports No. of Jacks
2 3 (1 per card)
KX-TVM503 x 2
No. of Ports
6