Panasonic KX-TVM50 Installation Manual page 107

4.3.5 Live Call Screening Private/Hands-Free Mode Assignment
This program assigns a VPS response for when a message is being left in a mailbox. It determines
whether an alarm tone is sent and whether the recorded message is played through the built-in
speaker of the extension. The default mode is hands-free. (This is station level programming and
should be done at each individual telephone.) PC programming is also available (see 4.3.6 Live Call
Screening Assignment via PC Programming).
1.
Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2.
Enter [25].
Screen output: LCS Private
3.
Press the ENTER button.
4.
Press the SELECT button until the desired selection is displayed.
Screen output: Hands-Free/Private
5.
Press the STORE button.
6.
Press the PROGRAM button or lift the handset to exit the Personal Programming mode.
7.
Repeat these steps for each telephone.
A single line telephone that is connected to the same extension as a proprietary telephone can also
be used to monitor an incoming message. Be sure that Live Call Screening on the connected
proprietary telephone has been activated. This feature is useful when you are using a cordless
telephone. The handset sounds an alarm tone to let you know that a message is being recorded. To
intercept the call, hang up and go off-hook.
4.3 KX-TDA Series Feature Programming for DPT Integration
Installation Manual 107