Advertisement
5. Settings reset
The default factory settings may be restored for each of the menus.
2
1
❶ Turn the dial to
, then press
the i button for 5 seconds (❷).
6. Technical characteristics
• Power supply 230 V ~, 50 Hz
• Class II insulation
• Change-over contact output 2 A max., 230V ~
• Type 1.C automated action
• Dimensions: 80 x 103 x 25 mm
• Protection rating: IP 30
• Installation in an environment with normal pollution
levels
Reset
Init
Menu 1
Menu 1
>5s
OR
OU
Reset
Init
Menu 2
Menu 2
❸ Press the button on the menu
you wish to reset, and hold the
button for 5 seconds.
3
>5s
3
• Storage temperature: -10°C /+70°C
• Operating temperature from -10°C/+40°C
• Ball test temperature: 75°C (Housing), 100°C (Terminal
block)
• Rated impulse voltage: 2,500V
4
4
5
EXIT
❹ Then press the OK button to
confirm the reset.
❺ To exit the mode, turn the dial.
8
Advertisement
