Miele PW 5105 Vario Operating And Installation Instructions page 27

Maximum final spin speed
The maximum final spin speed will vary
depending on the program chosen.
The final spin speed can be reduced.
However, you cannot select a final spin
speed higher than that permitted for the
program selected.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed.
Without final spin
^ Select "Rinse hold" from the submenu
"Extras". The laundry is not spun and
remains soaking in water. This will
prevent wrinkles if the laundry is not
removed immediately at the end of
the wash program.
– To start the final spin:
The Spin speed is highlighted in the
display.
– Start the final spin by pressing the
Start button.
– You can alter the spin speed.
^ Press the jog shuttle and change the
spin speed as desired.
^ Then confirm your choice. The spin
will begin.
– To end the program:
^ Press direct select button G
"Cancel". The water will drain away.
^ Open the drum door.
Deselect rinse spin and final spin
^ Select "Without spin". The laundry is
not spun after the final rinse but the
water is drained away.
Spin speed
27