EWM L1.01-Expert 2.0 Operating Instructions Manual page 67

6.1.12 Standard MIG/MAG torch
The MIG welding torch trigger is essentially used to start and stop the welding process.
Operating elements
Torch trigger
Additional functions such as program switching (before or after welding) are possible by tapping the torch
trigger (depending on machine type and control configuration).
The following parameters must be configured accordingly in the menu Special Parame-
ters > see 5.4.4.4 chapter .
> see 5.6.3.4 chapter
099-00L100-EW501
4.7.2019
Functions
• Start/stop welding
Welding procedure
MIG/MAG welding
67