EWM L1.01-Expert 2.0 Operating Instructions Manual page 49

5.7 Change welding procedure (Arc)
In this menu the user can change the welding procedure based on the preselected material, wire and gas
(change of process based on welding task).
For changing the welding task (JOB) > see 5.6 chapter
Enter the menu:
5.8 Online data transfer (network)
For machine variants with network capability (LG/WLG) only!
The network is used to transfer welding data from manual, automated and welding machines. It can in-
clude as many welding machines and computers as require and the collected data can be retrieved from
one or several server PCs.
The Xnet software allows the user to monitor all welding parameters in real time and/or to subsequently
analyse the saved welding data. The results can be used for process optimisation, welding calculations or
checking welding wire batches.
Depending on the welding machine the data are transferred to the server via LAN/WiFi and can then be
accessed in a browser window. The user interface and web-based design of the software offer the possi-
bility to analyse and monitor the welding data via a tablet PC.
5.8.1 Wired local network (LAN)
Status description
No physical connection to a network
Connection to the network, the machine has been
configured, no data transfer
Connection to the network, the machine has been
configured and transfers data
Connection to the network, the machine has been
configured and tries to connect to the data server
099-00L100-EW501
4.7.2019
Operating the machine control
Figure 5-25
Status display
Deactivated LAN symbol
Activated LAN symbol
LAN symbol flashing
LAN symbol flashing in the specified rhythm
Change welding procedure (Arc)
49