ETC High End Systems SolaPix 7 User Manual page 5

Introduction
Congratulations on your purchase of the High End Systems SolaPix 7 automated fixture.
This manual provides important information for the safe installation, configuration, and
maintenance of your SolaPix 7 fixture. For your safety, read this entire manual prior to
installing, operating, or servicing the fixture.
ETC recommends that you update your fixture with the latest version of software before you
use the fixture. Software is available for free download from the ETC website:
etcconnect.com/Products/Automated-Fixtures.
• See View Software Version on page 21
currently installed on your fixture.
• See Update Fixture Software Using the USB Port on page 25
updating your fixture.
Document Conventions
This document uses the following conventions to draw your attention to important
information.
Note:
CAUTION:
undefined or unwanted consequences of an action, potential for data loss or
an equipment problem.
CAUTION:
equipment surfaces may reach very high temperatures. Allow the
fixture to cool before handling or servicing.
WARNING:
occur, people may be harmed, or there are serious or dangerous
consequences of an action.
WARNING:
situations where there is a risk of electric shock.
All ETC High End Systems documents are available for free download from our website:
etcconnect.com/Products/Automated-Fixtures.
Please email comments about this manual to: TechComm@etcconnect.com.
Introduction
Notes are helpful hints and information that is supplemental to the main text.
A Caution statement indicates situations where there may be
Hot Surfaces. This statement indicates that while operating,
A Warning statement indicates situations where damage may
RISK OF ELECTRIC SHOCK! This warning statement indicates
to determine which version of software is
for instructions about
1