Paper Recommendations; Loading Paper; Storing Paper; Types Of Paper And Other Media - Ricoh CL3500N Maintenance Manual

Paper and Other Media

Paper Recommendations

Loading Paper

❒ Do not use ink-jet printer paper because it may stick to the fusing unit and
cause a paper misfeed.
❒ Set the paper as described below
• Tray 1, Paper Feed Unit (Tray 2, Tray 3): Print side facing up
• Bypass Tray: Print side facing down
❒ Print quality cannot be guaranteed if paper other than the ones recommended
is used. For more information about recommended paper, contact your sales
or service representative.
❒ Do not use paper that has already been printed onto by other printers.

Storing Paper

• Paper should always be stored properly. Improperly stored paper might result
in poor print quality, paper misfeeds, or printer damage. Recommendations
are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep paper in the package in which the paper came.

Types of Paper and Other Media

Plain Paper
Paper thickness
Printer setup
Printer driver setup
Enabled paper feeding tray Any input tray can be used.
2
60.2 - 104.7 g/m (16 - 28 lb.)
• [Thin]: 60.2 - 90.2 g/m
• [Normal]: 90.2 - 104.7 g/m
Make the following two settings using the control panel:
• Press [Paper Input] menu, [Paper Type], and then [Plain Paper].
• Press [Maintenance] menu, and then [Thin] or [Normal].
Click [Plain] or [Plain & Recycled] in the [Type:] list.
2
(16 - 24 lb.)
2
(24 - 28 lb.)
9