Hollyland Solidcom C1 Pro Quick Manual page 8

Operation Guide
① ① Install the batte .
Step 1: Slide the batte
compa ment cover lock.
② Turn on the master headset and remote headsets.
Master Headset Sta up
③ Turn on the microphone.
80°
85°
110°
Move the microphone boom upwards clockwise.
④ The Solidcom C1 Pro system is now ready for use.
Step 2: Open the cover.
1. Ensure that all the headsets are turned ON.
2. The indicator light stops ashing and stays on when the master
Nameplate
Power Toggle
headset is successfully connected with the remote headsets.
3. Red nameplate: Master headset Blue nameplate: Remote headset
85°
Direction for muting the microphone
7
Step 3: Place the batte
compa ment and close the cover.
85°
Move the microphone boom upwards counterclockwise.
into the
80°
85°
110°