Nibe F1345 Service Manual page 46

7 Component replacement
NOTE
Servicing should only be carried out by persons
with the necessary expertise.
Cut the current with the circuit breaker before
carrying out any servicing.
F1345 can contain liquids at high temperature
and under high pressure.
When replacing components on F1345 only re-
placement parts from NIBE may be used.
An ESD bracelet must be worn when replacing
the card.
Basic
Front cover
1. Remove the screws from the lower edge of the front
cover.
2. Lift the cover out at the bottom edge and up.
Top panel
1. Lift off the front cover, according to the previous in-
structions.
2. Remove the six screws in the top panel.
3. Lift the top panel straight up.
46 Chapter 7 | Component replacement
2
1
F1345