Selecting The Base Film (If Needed) - Ricoh Aficio 6110 Operating Instructions Manual

Selecting the Base Film (If Needed)

Note
When you use negative film for copying, use that film's appropriate base film for shading.
1
Confirm the manufacture, model name, and ASA
rating of the film you want to use.
2
Select a base film suitable for the film to copy.
Note
The following base film slides have been prepared as accessories.
• For FUJICOLOR (registered trademark of FUJI PHOTO COMPANY LIMITED.)
• For AGFA (registered trademark of AGFAGEVAERT AG.)
• For KODAK (registered trademark of EASTMAN KODAK COMPANY.)
If you use film that does not have suitable base film, you should make the base film yourself.
3
Open the film strip holder and set the base film
in the film strip holder.
Note
The base film must be set sideways in the strip holder.
There is no difference between both sides of the base
film.
4
Close the holder and lock it as shown in the il-
lustration.
1
1: Base film
Preparing the Film
See page 234.
TRSR0H0E
217