Bertazzoni REF24PR Instruction Manual page 9

Fix the top baffle to the top of the cabinet inner with screws, then install the screw caps.
Open the lower door of cabinet the maximum angle, and open the lower door of the refrigerator to the
corresponding position. Sliding the block to make sure inner edge align with the lower door edge of
refrigerator, then fix the block to the door of cabinet with screw and install screw caps. Fix the upper
refrigerator door to the cabinet door in the same way.
Take out the sealing strip from accessory bag, and press it in the gap between the cabinet and the
refrigerator, then adjust the limit hook to original position . Installation is completed.
（The picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor）
Sealing strip
Limit hook
7
Screw
Screw cap
Screw Cap
Screw
Block