Functions - Bertazzoni REF24PR Instruction Manual

3.2 Functions

（The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor）
1)Key
A.Temperature setting button of refrigerator compartment
2)Display screen
①setting 1：46
②setting 2：43
③setting 3：39
④setting 4：36
3)Display
Once initially powered on the display screen is on full display for 3s.
and then the refrigerator runs according to setting 3.
Normal operation display
In case of a failure the corresponding LED blinks. ,
In case of no failures , it shows
4)temperature setting
Each time the temperature setting
After the temperature setting
The shift regulation is:
setting 1
5)Lock/Unlock
When the temperature control panel is in lock state, it needs to long press temperature setting key
for 3 seconds for unlocking the panel, all LEDs will blink for 2 second when panel is unlocked.
When the temperature control panel is in unlock state, if there is no operation on control panel within
30 seconds, it will enter into lock state automatically.
,
the actual temperature setting of refrigerator.
Fault Code
indicator setting 1
indicator setting 2
indicator setting 3
indicator setting 4
button A is pressed once the
has been completed, the refrigerator will run according to the set value after 30s.
setting 2
①
②
③
④
A
Fault Description
Refrigerator temperature
sensor circuit
Refrigerator defrost sensor
Freezer defrost sensor
Ambient temperature sensor
, temperature setting
setting 3 setting 4
13
changes one time.