Planet VIP-156 User Manual page 15

In initially firmware version: V1.0, the VIP-157 default
machine operation is at PSTN mode. If user want to make a
VoIP phone call, please press the "*" key to switch to PSTN
Hint
mode.
After latest firmware version: V2.0 or higher, the VIP-157
is at VoIP mode. If user want to make a PSTN phone call,
please press the "0*" key to switch to PSTN mode.
Following keypad commands can be used to display the network settings enabled on ATA via voice
prompt.
IVR Menu Choice
#120#
#121#
#122#
#123#
#124#
#125#
#128#
Hint
Machine operation
Check IP Address
Check network connection Type
Check the Phone Number
Check Network Mask
Check Gateway IP Address
Check Primary DNS Server Setting
Check Firmware Version
Please contact your Internet service provider to obtain the
Internet access type, and select the proper network setti
ATA
in to establish the network connections.
Notes:
IVR will announce the current IP address of
the ATA.
IVR will announce if DHCP in enabled or
disabled.
IVR will announce current enabled VoIP
number.
IVR will announce the current network mask
of the ATA.
IVR will announce the current gateway IP
address of the ATA.
IVR will announce the current setting in the
Primary DNS field.
IVR will announce the version of the
firmware running on the ATA.
ngs
15